Click image to view full size image
Characteristics of MTB series magnetic damper
1 magnetic damper, also known as tension controller, tension device or brake, is the magnetic field as the medium to transfer constant torque device.
The damping plate and the magnet no contact, no sliding friction, so the service life is long, the tension control is extremely stable.
2 installation is simple in structure, easy to adjust the output torque.
3 the structure design is compact, the volume is small, can work stably in various positions.
Adjustment method of MTB series magnetic damper and its application
1 customers will scale to 4 above, if the tension is too large, the best selection of small size damper.
2 if the scale value of 4 is used, it is possible to generate force fluctuations. Please press the back 3 to eliminate the ripple.
3 loosen the fastening screws, turn the scale to 9, rotate the spindle slowly and turn the scale to 0, and then go to the required calibration value.
4 if there is tension fluctuation in the process of use, please repeat the above 3 steps to get the satisfactory tension. 5 damper using a medium magnetic material, high brittleness, so do not open, to avoid mechanical damage.
1 magnetic damper, also known as tension controller, tension device or brake, is the magnetic field as the medium to transfer constant torque device.
The damping plate and the magnet no contact, no sliding friction, so the service life is long, the tension control is extremely stable.
2 installation is simple in structure, easy to adjust the output torque.
3 the structure design is compact, the volume is small, can work stably in various positions.
Adjustment method of MTB series magnetic damper and its application
1 customers will scale to 4 above, if the tension is too large, the best selection of small size damper.
2 if the scale value of 4 is used, it is possible to generate force fluctuations. Please press the back 3 to eliminate the ripple.
3 loosen the fastening screws, turn the scale to 9, rotate the spindle slowly and turn the scale to 0, and then go to the required calibration value.
4 if there is tension fluctuation in the process of use, please repeat the above 3 steps to get the satisfactory tension. 5 damper using a medium magnetic material, high brittleness, so do not open, to avoid mechanical damage.
| Model | Torque range N.m | Tension (g) | Reference line diameter | |||||||
| MTB-06 | 1000-6000 | |||||||||
| A | B | C | D | E | F | G | H | I | J | K |
| 60mm | M5x3 | 84mm | 56mm | 26mm | 16mm | 5mm | ||||